Struct regex_automata::nfa::thompson::backtrack::BoundedBacktracker

pub struct BoundedBacktracker { /* private fields */ }

A backtracking regex engine that bounds its execution to avoid exponential blow-up.

This regex engine only implements leftmost-first match semantics and only supports leftmost searches. It effectively does the same thing as a PikeVM, but typically does it faster because it doesn’t have to worry about copying capturing group spans for most NFA states. Instead, the backtracker can maintain one set of captures (provided by the caller) and never needs to copy them. In exchange, the backtracker bounds itself to ensure it doesn’t exhibit worst case exponential time. This results in the backtracker only being able to handle short haystacks given reasonable memory usage.

Searches may return an error!

By design, this backtracking regex engine is bounded. This bound is implemented by not visiting any combination of NFA state ID and position in a haystack more than once. Thus, the total memory required to bound backtracking is proportional to haystack.len() * nfa.states().len(). This can obviously get quite large, since large haystacks aren’t terribly uncommon. To avoid using exorbitant memory, the capacity is bounded by a fixed limit set via Config::visited_capacity. Thus, if the total capacity required for a particular regex and a haystack exceeds this capacity, then the search routine will return an error.

Unlike other regex engines that may return an error at search time (like the DFA or the hybrid NFA/DFA), there is no way to guarantee that a bounded backtracker will work for every haystack. Therefore, this regex engine only exposes fallible search routines to avoid the footgun of panicking when running a search on a haystack that is too big.

If one wants to use the fallible search APIs without handling the error, the only way to guarantee an error won’t occur from the haystack length is to ensure the haystack length does not exceed BoundedBacktracker::max_haystack_len.

Example: Unicode word boundaries

This example shows that the bounded backtracker implements Unicode word boundaries correctly by default.

use regex_automata::{nfa::thompson::backtrack::BoundedBacktracker, Match};

let re = BoundedBacktracker::new(r"\b\w+\b")?;
let mut cache = re.create_cache();

let mut it = re.try_find_iter(&mut cache, "Шерлок Холмс");
assert_eq!(Some(Ok(Match::must(0, 0..12))), it.next());
assert_eq!(Some(Ok(Match::must(0, 13..23))), it.next());
assert_eq!(None, it.next());

Example: multiple regex patterns

The bounded backtracker supports searching for multiple patterns simultaneously, just like other regex engines. Note though that because it uses a backtracking strategy, this regex engine is unlikely to scale well as more patterns are added. But then again, as more patterns are added, the maximum haystack length allowed will also shorten (assuming the visited capacity remains invariant).

use regex_automata::{nfa::thompson::backtrack::BoundedBacktracker, Match};

let re = BoundedBacktracker::new_many(&["[a-z]+", "[0-9]+"])?;
let mut cache = re.create_cache();

let mut it = re.try_find_iter(&mut cache, "abc 1 foo 4567 0 quux");
assert_eq!(Some(Ok(Match::must(0, 0..3))), it.next());
assert_eq!(Some(Ok(Match::must(1, 4..5))), it.next());
assert_eq!(Some(Ok(Match::must(0, 6..9))), it.next());
assert_eq!(Some(Ok(Match::must(1, 10..14))), it.next());
assert_eq!(Some(Ok(Match::must(1, 15..16))), it.next());
assert_eq!(Some(Ok(Match::must(0, 17..21))), it.next());
assert_eq!(None, it.next());

Implementations

impl BoundedBacktracker

pub fn new(pattern: &str) -> Result<BoundedBacktracker, BuildError>

Parse the given regular expression using the default configuration and return the corresponding BoundedBacktracker.

If you want a non-default configuration, then use the Builder to set your own configuration.

Example

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Match,
};

let re = BoundedBacktracker::new("foo[0-9]+bar")?;
let mut cache = re.create_cache();
assert_eq!(
    Some(Ok(Match::must(0, 3..14))),
    re.try_find_iter(&mut cache, "zzzfoo12345barzzz").next(),
);

pub fn new_many<P: AsRef<str>>( patterns: &[P], ) -> Result<BoundedBacktracker, BuildError>

Like new, but parses multiple patterns into a single “multi regex.” This similarly uses the default regex configuration.

Example

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Match,
};

let re = BoundedBacktracker::new_many(&["[a-z]+", "[0-9]+"])?;
let mut cache = re.create_cache();

let mut it = re.try_find_iter(&mut cache, "abc 1 foo 4567 0 quux");
assert_eq!(Some(Ok(Match::must(0, 0..3))), it.next());
assert_eq!(Some(Ok(Match::must(1, 4..5))), it.next());
assert_eq!(Some(Ok(Match::must(0, 6..9))), it.next());
assert_eq!(Some(Ok(Match::must(1, 10..14))), it.next());
assert_eq!(Some(Ok(Match::must(1, 15..16))), it.next());
assert_eq!(Some(Ok(Match::must(0, 17..21))), it.next());
assert_eq!(None, it.next());

pub fn new_from_nfa(nfa: NFA) -> Result<BoundedBacktracker, BuildError>

Example

This shows how to hand assemble a regular expression via its HIR, compile an NFA from it and build a BoundedBacktracker from the NFA.

use regex_automata::{
    nfa::thompson::{NFA, backtrack::BoundedBacktracker},
    Match,
};
use regex_syntax::hir::{Hir, Class, ClassBytes, ClassBytesRange};

let hir = Hir::class(Class::Bytes(ClassBytes::new(vec![
    ClassBytesRange::new(b'0', b'9'),
    ClassBytesRange::new(b'A', b'Z'),
    ClassBytesRange::new(b'_', b'_'),
    ClassBytesRange::new(b'a', b'z'),
])));

let config = NFA::config().nfa_size_limit(Some(1_000));
let nfa = NFA::compiler().configure(config).build_from_hir(&hir)?;

let re = BoundedBacktracker::new_from_nfa(nfa)?;
let (mut cache, mut caps) = (re.create_cache(), re.create_captures());
let expected = Some(Match::must(0, 3..4));
re.try_captures(&mut cache, "!@#A#@!", &mut caps)?;
assert_eq!(expected, caps.get_match());

pub fn always_match() -> Result<BoundedBacktracker, BuildError>

Create a new BoundedBacktracker that matches every input.

Example

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Match,
};

let re = BoundedBacktracker::always_match()?;
let mut cache = re.create_cache();

let expected = Some(Ok(Match::must(0, 0..0)));
assert_eq!(expected, re.try_find_iter(&mut cache, "").next());
assert_eq!(expected, re.try_find_iter(&mut cache, "foo").next());

pub fn never_match() -> Result<BoundedBacktracker, BuildError>

Create a new BoundedBacktracker that never matches any input.

Example

use regex_automata::nfa::thompson::backtrack::BoundedBacktracker;

let re = BoundedBacktracker::never_match()?;
let mut cache = re.create_cache();

assert_eq!(None, re.try_find_iter(&mut cache, "").next());
assert_eq!(None, re.try_find_iter(&mut cache, "foo").next());

pub fn config() -> Config

Return a default configuration for a BoundedBacktracker.

This is a convenience routine to avoid needing to import the Config type when customizing the construction of a BoundedBacktracker.

Example

This example shows how to disable UTF-8 mode. When UTF-8 mode is disabled, zero-width matches that split a codepoint are allowed. Otherwise they are never reported.

In the code below, notice that "" is permitted to match positions that split the encoding of a codepoint.

use regex_automata::{
    nfa::thompson::{self, backtrack::BoundedBacktracker},
    Match,
};

let re = BoundedBacktracker::builder()
    .thompson(thompson::Config::new().utf8(false))
    .build(r"")?;
let mut cache = re.create_cache();

let haystack = "a☃z";
let mut it = re.try_find_iter(&mut cache, haystack);
assert_eq!(Some(Ok(Match::must(0, 0..0))), it.next());
assert_eq!(Some(Ok(Match::must(0, 1..1))), it.next());
assert_eq!(Some(Ok(Match::must(0, 2..2))), it.next());
assert_eq!(Some(Ok(Match::must(0, 3..3))), it.next());
assert_eq!(Some(Ok(Match::must(0, 4..4))), it.next());
assert_eq!(Some(Ok(Match::must(0, 5..5))), it.next());
assert_eq!(None, it.next());

pub fn builder() -> Builder

Return a builder for configuring the construction of a BoundedBacktracker.

This is a convenience routine to avoid needing to import the Builder type in common cases.

Example

This example shows how to use the builder to disable UTF-8 mode everywhere.

use regex_automata::{
    nfa::thompson::{self, backtrack::BoundedBacktracker},
    util::syntax,
    Match,
};

let re = BoundedBacktracker::builder()
    .syntax(syntax::Config::new().utf8(false))
    .thompson(thompson::Config::new().utf8(false))
    .build(r"foo(?-u:[^b])ar.*")?;
let (mut cache, mut caps) = (re.create_cache(), re.create_captures());

let haystack = b"\xFEfoo\xFFarzz\xE2\x98\xFF\n";
let expected = Some(Match::must(0, 1..9));
re.try_captures(&mut cache, haystack, &mut caps)?;
assert_eq!(expected, caps.get_match());

pub fn create_cache(&self) -> Cache

Create a new cache for this regex.

The cache returned should only be used for searches for this regex. If you want to reuse the cache for another regex, then you must call Cache::reset with that regex (or, equivalently, BoundedBacktracker::reset_cache).

pub fn create_captures(&self) -> Captures

Create a new empty set of capturing groups that is guaranteed to be valid for the search APIs on this BoundedBacktracker.

A Captures value created for a specific BoundedBacktracker cannot be used with any other BoundedBacktracker.

This is a convenience function for Captures::all. See the Captures documentation for an explanation of its alternative constructors that permit the BoundedBacktracker to do less work during a search, and thus might make it faster.

pub fn reset_cache(&self, cache: &mut Cache)

Reset the given cache such that it can be used for searching with the this BoundedBacktracker (and only this BoundedBacktracker).

A cache reset permits reusing memory already allocated in this cache with a different BoundedBacktracker.

Example

This shows how to re-purpose a cache for use with a different BoundedBacktracker.

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Match,
};

let re1 = BoundedBacktracker::new(r"\w")?;
let re2 = BoundedBacktracker::new(r"\W")?;

let mut cache = re1.create_cache();
assert_eq!(
    Some(Ok(Match::must(0, 0..2))),
    re1.try_find_iter(&mut cache, "Δ").next(),
);

// Using 'cache' with re2 is not allowed. It may result in panics or
// incorrect results. In order to re-purpose the cache, we must reset
// it with the BoundedBacktracker we'd like to use it with.
//
// Similarly, after this reset, using the cache with 're1' is also not
// allowed.
cache.reset(&re2);
assert_eq!(
    Some(Ok(Match::must(0, 0..3))),
    re2.try_find_iter(&mut cache, "☃").next(),
);

pub fn pattern_len(&self) -> usize

Returns the total number of patterns compiled into this BoundedBacktracker.

In the case of a BoundedBacktracker that contains no patterns, this returns 0.

Example

This example shows the pattern length for a BoundedBacktracker that never matches:

use regex_automata::nfa::thompson::backtrack::BoundedBacktracker;

let re = BoundedBacktracker::never_match()?;
assert_eq!(re.pattern_len(), 0);

And another example for a BoundedBacktracker that matches at every position:

use regex_automata::nfa::thompson::backtrack::BoundedBacktracker;

let re = BoundedBacktracker::always_match()?;
assert_eq!(re.pattern_len(), 1);

And finally, a BoundedBacktracker that was constructed from multiple patterns:

use regex_automata::nfa::thompson::backtrack::BoundedBacktracker;

let re = BoundedBacktracker::new_many(&["[0-9]+", "[a-z]+", "[A-Z]+"])?;
assert_eq!(re.pattern_len(), 3);

pub fn get_config(&self) -> &Config

Return the config for this BoundedBacktracker.

pub fn get_nfa(&self) -> &NFA

Returns a reference to the underlying NFA.

pub fn max_haystack_len(&self) -> usize

Returns the maximum haystack length supported by this backtracker.

This routine is a function of both Config::visited_capacity and the internal size of the backtracker’s NFA.

Example

This example shows how the maximum haystack length can vary depending on the size of the regex itself. Note though that the specific maximum values here are not an API guarantee. The default visited capacity is subject to change and not covered by semver.

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Match, MatchError,
};

// If you're only using ASCII, you get a big budget.
let re = BoundedBacktracker::new(r"(?-u)\w+")?;
let mut cache = re.create_cache();
assert_eq!(re.max_haystack_len(), 299_592);
// Things work up to the max.
let mut haystack = "a".repeat(299_592);
let expected = Some(Ok(Match::must(0, 0..299_592)));
assert_eq!(expected, re.try_find_iter(&mut cache, &haystack).next());
// But you'll get an error if you provide a haystack that's too big.
// Notice that we use the 'try_find_iter' routine instead, which
// yields Result<Match, MatchError> instead of Match.
haystack.push('a');
let expected = Some(Err(MatchError::haystack_too_long(299_593)));
assert_eq!(expected, re.try_find_iter(&mut cache, &haystack).next());

// Unicode inflates the size of the underlying NFA quite a bit, and
// thus means that the backtracker can only handle smaller haystacks,
// assuming that the visited capacity remains unchanged.
let re = BoundedBacktracker::new(r"\w+")?;
assert!(re.max_haystack_len() <= 7_000);
// But we can increase the visited capacity to handle bigger haystacks!
let re = BoundedBacktracker::builder()
    .configure(BoundedBacktracker::config().visited_capacity(1<<20))
    .build(r"\w+")?;
assert!(re.max_haystack_len() >= 25_000);
assert!(re.max_haystack_len() <= 28_000);

impl BoundedBacktracker

pub fn try_is_match<'h, I: Into<Input<'h>>>( &self, cache: &mut Cache, input: I, ) -> Result<bool, MatchError>

Returns true if and only if this regex matches the given haystack.

In the case of a backtracking regex engine, and unlike most other regex engines in this crate, short circuiting isn’t practical. However, this routine may still be faster because it instructs backtracking to not keep track of any capturing groups.

Errors

This routine only errors if the search could not complete. For this backtracking regex engine, this only occurs when the haystack length exceeds BoundedBacktracker::max_haystack_len.

When a search cannot complete, callers cannot know whether a match exists or not.

Example

use regex_automata::nfa::thompson::backtrack::BoundedBacktracker;

let re = BoundedBacktracker::new("foo[0-9]+bar")?;
let mut cache = re.create_cache();

assert!(re.try_is_match(&mut cache, "foo12345bar")?);
assert!(!re.try_is_match(&mut cache, "foobar")?);

Example: consistency with search APIs

is_match is guaranteed to return true whenever find returns a match. This includes searches that are executed entirely within a codepoint:

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Input,
};

let re = BoundedBacktracker::new("a*")?;
let mut cache = re.create_cache();

assert!(!re.try_is_match(&mut cache, Input::new("☃").span(1..2))?);

Notice that when UTF-8 mode is disabled, then the above reports a match because the restriction against zero-width matches that split a codepoint has been lifted:

use regex_automata::{
    nfa::thompson::{backtrack::BoundedBacktracker, NFA},
    Input,
};

let re = BoundedBacktracker::builder()
    .thompson(NFA::config().utf8(false))
    .build("a*")?;
let mut cache = re.create_cache();

assert!(re.try_is_match(&mut cache, Input::new("☃").span(1..2))?);

pub fn try_find<'h, I: Into<Input<'h>>>( &self, cache: &mut Cache, input: I, ) -> Result<Option<Match>, MatchError>

Executes a leftmost forward search and returns a Match if one exists.

This routine only includes the overall match span. To get access to the individual spans of each capturing group, use BoundedBacktracker::try_captures.

Errors

This routine only errors if the search could not complete. For this backtracking regex engine, this only occurs when the haystack length exceeds BoundedBacktracker::max_haystack_len.

When a search cannot complete, callers cannot know whether a match exists or not.

Example

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Match,
};

let re = BoundedBacktracker::new("foo[0-9]+")?;
let mut cache = re.create_cache();
let expected = Match::must(0, 0..8);
assert_eq!(Some(expected), re.try_find(&mut cache, "foo12345")?);

pub fn try_captures<'h, I: Into<Input<'h>>>( &self, cache: &mut Cache, input: I, caps: &mut Captures, ) -> Result<(), MatchError>

Executes a leftmost forward search and writes the spans of capturing groups that participated in a match into the provided Captures value. If no match was found, then Captures::is_match is guaranteed to return false.

Errors

This routine only errors if the search could not complete. For this backtracking regex engine, this only occurs when the haystack length exceeds BoundedBacktracker::max_haystack_len.

When a search cannot complete, callers cannot know whether a match exists or not.

Example

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Span,
};

let re = BoundedBacktracker::new(
    r"^([0-9]{4})-([0-9]{2})-([0-9]{2})$",
)?;
let (mut cache, mut caps) = (re.create_cache(), re.create_captures());

re.try_captures(&mut cache, "2010-03-14", &mut caps)?;
assert!(caps.is_match());
assert_eq!(Some(Span::from(0..4)), caps.get_group(1));
assert_eq!(Some(Span::from(5..7)), caps.get_group(2));
assert_eq!(Some(Span::from(8..10)), caps.get_group(3));

pub fn try_find_iter<'r, 'c, 'h, I: Into<Input<'h>>>( &'r self, cache: &'c mut Cache, input: I, ) -> TryFindMatches<'r, 'c, 'h>

Returns an iterator over all non-overlapping leftmost matches in the given bytes. If no match exists, then the iterator yields no elements.

If the regex engine returns an error at any point, then the iterator will yield that error.

Example

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Match, MatchError,
};

let re = BoundedBacktracker::new("foo[0-9]+")?;
let mut cache = re.create_cache();

let text = "foo1 foo12 foo123";
let result: Result<Vec<Match>, MatchError> = re
    .try_find_iter(&mut cache, text)
    .collect();
let matches = result?;
assert_eq!(matches, vec![
    Match::must(0, 0..4),
    Match::must(0, 5..10),
    Match::must(0, 11..17),
]);

pub fn try_captures_iter<'r, 'c, 'h, I: Into<Input<'h>>>( &'r self, cache: &'c mut Cache, input: I, ) -> TryCapturesMatches<'r, 'c, 'h>

Returns an iterator over all non-overlapping Captures values. If no match exists, then the iterator yields no elements.

This yields the same matches as BoundedBacktracker::try_find_iter, but it includes the spans of all capturing groups that participate in each match.

If the regex engine returns an error at any point, then the iterator will yield that error.

Tip: See util::iter::Searcher for how to correctly iterate over all matches in a haystack while avoiding the creation of a new Captures value for every match. (Which you are forced to do with an Iterator.)

Example

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Span,
};

let re = BoundedBacktracker::new("foo(?P<numbers>[0-9]+)")?;
let mut cache = re.create_cache();

let text = "foo1 foo12 foo123";
let mut spans = vec![];
for result in re.try_captures_iter(&mut cache, text) {
    let caps = result?;
    // The unwrap is OK since 'numbers' matches if the pattern matches.
    spans.push(caps.get_group_by_name("numbers").unwrap());
}
assert_eq!(spans, vec![
    Span::from(3..4),
    Span::from(8..10),
    Span::from(14..17),
]);

impl BoundedBacktracker

pub fn try_search( &self, cache: &mut Cache, input: &Input<'_>, caps: &mut Captures, ) -> Result<(), MatchError>

Executes a leftmost forward search and writes the spans of capturing groups that participated in a match into the provided Captures value. If no match was found, then Captures::is_match is guaranteed to return false.

This is like BoundedBacktracker::try_captures, but it accepts a concrete &Input instead of an Into<Input>.

Errors

This routine only errors if the search could not complete. For this backtracking regex engine, this only occurs when the haystack length exceeds BoundedBacktracker::max_haystack_len.

When a search cannot complete, callers cannot know whether a match exists or not.

Example: specific pattern search

This example shows how to build a multi bounded backtracker that permits searching for specific patterns.

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Anchored, Input, Match, PatternID,
};

let re = BoundedBacktracker::new_many(&[
    "[a-z0-9]{6}",
    "[a-z][a-z0-9]{5}",
])?;
let (mut cache, mut caps) = (re.create_cache(), re.create_captures());
let haystack = "foo123";

// Since we are using the default leftmost-first match and both
// patterns match at the same starting position, only the first pattern
// will be returned in this case when doing a search for any of the
// patterns.
let expected = Some(Match::must(0, 0..6));
re.try_search(&mut cache, &Input::new(haystack), &mut caps)?;
assert_eq!(expected, caps.get_match());

// But if we want to check whether some other pattern matches, then we
// can provide its pattern ID.
let expected = Some(Match::must(1, 0..6));
let input = Input::new(haystack)
    .anchored(Anchored::Pattern(PatternID::must(1)));
re.try_search(&mut cache, &input, &mut caps)?;
assert_eq!(expected, caps.get_match());

Example: specifying the bounds of a search

This example shows how providing the bounds of a search can produce different results than simply sub-slicing the haystack.

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    Match, Input,
};

let re = BoundedBacktracker::new(r"\b[0-9]{3}\b")?;
let (mut cache, mut caps) = (re.create_cache(), re.create_captures());
let haystack = "foo123bar";

// Since we sub-slice the haystack, the search doesn't know about
// the larger context and assumes that `123` is surrounded by word
// boundaries. And of course, the match position is reported relative
// to the sub-slice as well, which means we get `0..3` instead of
// `3..6`.
let expected = Some(Match::must(0, 0..3));
re.try_search(&mut cache, &Input::new(&haystack[3..6]), &mut caps)?;
assert_eq!(expected, caps.get_match());

// But if we provide the bounds of the search within the context of the
// entire haystack, then the search can take the surrounding context
// into account. (And if we did find a match, it would be reported
// as a valid offset into `haystack` instead of its sub-slice.)
let expected = None;
re.try_search(
    &mut cache, &Input::new(haystack).range(3..6), &mut caps,
)?;
assert_eq!(expected, caps.get_match());

pub fn try_search_slots( &self, cache: &mut Cache, input: &Input<'_>, slots: &mut [Option<NonMaxUsize>], ) -> Result<Option<PatternID>, MatchError>

Executes a leftmost forward search and writes the spans of capturing groups that participated in a match into the provided slots, and returns the matching pattern ID. The contents of the slots for patterns other than the matching pattern are unspecified. If no match was found, then None is returned and the contents of all slots is unspecified.

This is like BoundedBacktracker::try_search, but it accepts a raw slots slice instead of a Captures value. This is useful in contexts where you don’t want or need to allocate a Captures.

It is legal to pass any number of slots to this routine. If the regex engine would otherwise write a slot offset that doesn’t fit in the provided slice, then it is simply skipped. In general though, there are usually three slice lengths you might want to use:

• An empty slice, if you only care about which pattern matched.
• A slice with pattern_len() * 2 slots, if you only care about the overall match spans for each matching pattern.
• A slice with slot_len() slots, which permits recording match offsets for every capturing group in every pattern.

Errors

This routine only errors if the search could not complete. For this backtracking regex engine, this only occurs when the haystack length exceeds BoundedBacktracker::max_haystack_len.

When a search cannot complete, callers cannot know whether a match exists or not.

Example

This example shows how to find the overall match offsets in a multi-pattern search without allocating a Captures value. Indeed, we can put our slots right on the stack.

use regex_automata::{
    nfa::thompson::backtrack::BoundedBacktracker,
    PatternID, Input,
};

let re = BoundedBacktracker::new_many(&[
    r"\pL+",
    r"\d+",
])?;
let mut cache = re.create_cache();
let input = Input::new("!@#123");

// We only care about the overall match offsets here, so we just
// allocate two slots for each pattern. Each slot records the start
// and end of the match.
let mut slots = [None; 4];
let pid = re.try_search_slots(&mut cache, &input, &mut slots)?;
assert_eq!(Some(PatternID::must(1)), pid);

// The overall match offsets are always at 'pid * 2' and 'pid * 2 + 1'.
// See 'GroupInfo' for more details on the mapping between groups and
// slot indices.
let slot_start = pid.unwrap().as_usize() * 2;
let slot_end = slot_start + 1;
assert_eq!(Some(3), slots[slot_start].map(|s| s.get()));
assert_eq!(Some(6), slots[slot_end].map(|s| s.get()));

Trait Implementations

impl Clone for BoundedBacktracker

fn clone(&self) -> BoundedBacktracker

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for BoundedBacktracker

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.