Struct OpenFlags

#[repr(C)]
pub struct OpenFlags(/* private fields */);

Flags for opening SQLite database connections. See sqlite3_open_v2 for details.

The default open flags are SQLITE_OPEN_READ_WRITE | SQLITE_OPEN_CREATE | SQLITE_OPEN_URI | SQLITE_OPEN_NO_MUTEX. See Connection::open for some discussion about these flags.

Implementations

impl OpenFlags

pub const SQLITE_OPEN_READ_ONLY: Self = _

The database is opened in read-only mode. If the database does not already exist, an error is returned.

pub const SQLITE_OPEN_READ_WRITE: Self = _

The database is opened for reading and writing if possible, or reading only if the file is write-protected by the operating system. In either case the database must already exist, otherwise an error is returned.

pub const SQLITE_OPEN_CREATE: Self = _

The database is created if it does not already exist

pub const SQLITE_OPEN_URI: Self = _

The filename can be interpreted as a URI if this flag is set.

pub const SQLITE_OPEN_MEMORY: Self = _

The database will be opened as an in-memory database.

pub const SQLITE_OPEN_NO_MUTEX: Self = _

The new database connection will not use a per-connection mutex (the connection will use the “multi-thread” threading mode, in SQLite parlance).

This is used by default, as proper Send/Sync usage (in particular, the fact that Connection does not implement Sync) ensures thread-safety without the need to perform locking around all calls.

pub const SQLITE_OPEN_FULL_MUTEX: Self = _

The new database connection will use a per-connection mutex – the “serialized” threading mode, in SQLite parlance.

Caveats

This flag should probably never be used with rusqlite, as we ensure thread-safety statically (we implement Send and not Sync). That said

Critically, even if this flag is used, the Connection is not safe to use across multiple threads simultaneously. To access a database from multiple threads, you should either create multiple connections, one for each thread (if you have very many threads, wrapping the rusqlite::Connection in a mutex is also reasonable).

This is both because of the additional per-connection state stored by rusqlite (for example, the prepared statement cache), and because not all of SQLites functions are fully thread safe, even in serialized/SQLITE_OPEN_FULLMUTEX mode.

All that said, it’s fairly harmless to enable this flag with rusqlite, it will just slow things down while providing no benefit.

pub const SQLITE_OPEN_SHARED_CACHE: Self = _

The database is opened with shared cache enabled.

This is frequently useful for in-memory connections, but note that broadly speaking it’s discouraged by SQLite itself, which states “Any use of shared cache is discouraged” in the official documentation.

pub const SQLITE_OPEN_PRIVATE_CACHE: Self = _

The database is opened shared cache disabled.

pub const SQLITE_OPEN_NOFOLLOW: Self = _

The database filename is not allowed to be a symbolic link. (3.31.0)

pub const SQLITE_OPEN_EXRESCODE: Self = _

Extended result codes. (3.37.0)

impl OpenFlags

pub const fn empty() -> Self

Get a flags value with all bits unset.

pub const fn all() -> Self

Get a flags value with all known bits set.

pub const fn bits(&self) -> c_int

Get the underlying bits value.

The returned value is exactly the bits set in this flags value.

pub const fn from_bits(bits: c_int) -> Option<Self>

Convert from a bits value.

This method will return None if any unknown bits are set.

pub const fn from_bits_truncate(bits: c_int) -> Self

Convert from a bits value, unsetting any unknown bits.

pub const fn from_bits_retain(bits: c_int) -> Self

Convert from a bits value exactly.

pub fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

This method will return None if name is empty or doesn’t correspond to any named flag.

pub const fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

pub const fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

pub const fn intersects(&self, other: Self) -> bool

Whether any set bits in a source flags value are also set in a target flags value.

pub const fn contains(&self, other: Self) -> bool

Whether all set bits in a source flags value are also set in a target flags value.

pub fn insert(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

pub fn remove(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. remove won’t truncate other, but the ! operator will.

pub fn toggle(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

pub fn set(&mut self, other: Self, value: bool)

Call insert when value is true or remove when value is false.

pub const fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

pub const fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

pub const fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

pub const fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

pub const fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl OpenFlags

pub const fn iter(&self) -> Iter<OpenFlags>

Yield a set of contained flags values.

Each yielded flags value will correspond to a defined named flag. Any unknown bits will be yielded together as a final flags value.

pub const fn iter_names(&self) -> IterNames<OpenFlags>

Yield a set of contained named flags values.

This method is like iter, except only yields bits in contained named flags. Any unknown bits, or bits not corresponding to a contained flag will not be yielded.

Trait Implementations

impl Binary for OpenFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl BitAnd for OpenFlags

fn bitand(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

type Output = OpenFlags

The resulting type after applying the & operator.

impl BitAndAssign for OpenFlags

fn bitand_assign(&mut self, other: Self)

The bitwise and (&) of the bits in two flags values.

impl BitOr for OpenFlags

fn bitor(self, other: OpenFlags) -> Self

The bitwise or (|) of the bits in two flags values.

type Output = OpenFlags

The resulting type after applying the | operator.

impl BitOrAssign for OpenFlags

fn bitor_assign(&mut self, other: Self)

The bitwise or (|) of the bits in two flags values.

impl BitXor for OpenFlags

fn bitxor(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

type Output = OpenFlags

The resulting type after applying the ^ operator.

impl BitXorAssign for OpenFlags

fn bitxor_assign(&mut self, other: Self)

The bitwise exclusive-or (^) of the bits in two flags values.

impl Clone for OpenFlags

fn clone(&self) -> OpenFlags

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for OpenFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for OpenFlags

fn default() -> OpenFlags

Returns the “default value” for a type.

impl Extend<OpenFlags> for OpenFlags

fn extend<T: IntoIterator<Item = Self>>(&mut self, iterator: T)

The bitwise or (|) of the bits in each flags value.

fn extend_one(&mut self, item: A)

🔬This is a nightly-only experimental API. (extend_one)

Extends a collection with exactly one element.

fn extend_reserve(&mut self, additional: usize)

🔬This is a nightly-only experimental API. (extend_one)

Reserves capacity in a collection for the given number of additional elements.

impl Flags for OpenFlags

const FLAGS: &'static [Flag<OpenFlags>] = _

The set of defined flags.

type Bits = i32

The underlying bits type.

fn bits(&self) -> c_int

Get the underlying bits value.

fn from_bits_retain(bits: c_int) -> OpenFlags

Convert from a bits value exactly.

fn empty() -> Self

Get a flags value with all bits unset.

fn all() -> Self

Get a flags value with all known bits set.

fn from_bits(bits: Self::Bits) -> Option<Self>

Convert from a bits value.

fn from_bits_truncate(bits: Self::Bits) -> Self

Convert from a bits value, unsetting any unknown bits.

fn from_name(name: &str) -> Option<Self>

Get a flags value with the bits of a flag with the given name set.

fn iter(&self) -> Iter<Self>

Yield a set of contained flags values.

fn iter_names(&self) -> IterNames<Self>

Yield a set of contained named flags values.

fn is_empty(&self) -> bool

Whether all bits in this flags value are unset.

fn is_all(&self) -> bool

Whether all known bits in this flags value are set.

fn intersects(&self, other: Self) -> bool

where Self: Sized,

Whether any set bits in a source flags value are also set in a target flags value.

fn contains(&self, other: Self) -> bool

where Self: Sized,

Whether all set bits in a source flags value are also set in a target flags value.

fn insert(&mut self, other: Self)

where Self: Sized,

The bitwise or (|) of the bits in two flags values.

fn remove(&mut self, other: Self)

where Self: Sized,

The intersection of a source flags value with the complement of a target flags value (&!).

fn toggle(&mut self, other: Self)

where Self: Sized,

The bitwise exclusive-or (^) of the bits in two flags values.

fn set(&mut self, other: Self, value: bool)

where Self: Sized,

Call Flags::insert when value is true or Flags::remove when value is false.

fn intersection(self, other: Self) -> Self

The bitwise and (&) of the bits in two flags values.

fn union(self, other: Self) -> Self

The bitwise or (|) of the bits in two flags values.

fn difference(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

fn symmetric_difference(self, other: Self) -> Self

The bitwise exclusive-or (^) of the bits in two flags values.

fn complement(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

impl FromIterator<OpenFlags> for OpenFlags

fn from_iter<T: IntoIterator<Item = Self>>(iterator: T) -> Self

The bitwise or (|) of the bits in each flags value.

impl Hash for OpenFlags

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl IntoIterator for OpenFlags

type Item = OpenFlags

The type of the elements being iterated over.

type IntoIter = Iter<OpenFlags>

Which kind of iterator are we turning this into?

fn into_iter(self) -> Self::IntoIter

Creates an iterator from a value.

impl LowerHex for OpenFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Not for OpenFlags

fn not(self) -> Self

The bitwise negation (!) of the bits in a flags value, truncating the result.

type Output = OpenFlags

The resulting type after applying the ! operator.

impl Octal for OpenFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl PartialEq for OpenFlags

fn eq(&self, other: &OpenFlags) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PublicFlags for OpenFlags

type Primitive = i32

The type of the underlying storage.

type Internal = InternalBitFlags

The type of the internal field on the generated flags type.

impl Sub for OpenFlags

fn sub(self, other: Self) -> Self

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

type Output = OpenFlags

The resulting type after applying the - operator.

impl SubAssign for OpenFlags

fn sub_assign(&mut self, other: Self)

The intersection of a source flags value with the complement of a target flags value (&!).

This method is not equivalent to self & !other when other has unknown bits set. difference won’t truncate other, but the ! operator will.

impl UpperHex for OpenFlags

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Copy for OpenFlags

impl Eq for OpenFlags

impl StructuralPartialEq for OpenFlags