// Copyright 2023 The Matrix.org Foundation C.I.C.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//     http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for that specific language governing permissions and
// limitations under the License.

use std::{future::ready, sync::Arc};

use async_cell::sync::AsyncCell;
use async_rx::StreamExt as _;
use async_stream::stream;
use eyeball::{SharedObservable, Subscriber};
use eyeball_im::{Vector, VectorDiff};
use eyeball_im_util::vector::VectorObserverExt;
use futures_util::{pin_mut, stream, Stream, StreamExt as _};
use matrix_sdk::{
    executor::{spawn, JoinHandle},
    Client, SlidingSync, SlidingSyncList,
};
use matrix_sdk_base::RoomInfoNotableUpdate;
use tokio::{select, sync::broadcast};
use tracing::trace;

use super::{
    filters::BoxedFilterFn,
    sorters::{new_sorter_lexicographic, new_sorter_name, new_sorter_recency},
    Error, Room, State,
};

/// A `RoomList` represents a list of rooms, from a
/// [`RoomListService`](super::RoomListService).
#[derive(Debug)]
pub struct RoomList {
    client: Client,
    sliding_sync: Arc<SlidingSync>,
    sliding_sync_list: SlidingSyncList,
    loading_state: SharedObservable<RoomListLoadingState>,
    loading_state_task: JoinHandle<()>,
}

impl Drop for RoomList {
    fn drop(&mut self) {
        self.loading_state_task.abort();
    }
}

impl RoomList {
    pub(super) async fn new(
        client: &Client,
        sliding_sync: &Arc<SlidingSync>,
        sliding_sync_list_name: &str,
        room_list_service_state: Subscriber<State>,
    ) -> Result<Self, Error> {
        let sliding_sync_list = sliding_sync
            .on_list(sliding_sync_list_name, |list| ready(list.clone()))
            .await
            .ok_or_else(|| Error::UnknownList(sliding_sync_list_name.to_owned()))?;

        let loading_state =
            SharedObservable::new(match sliding_sync_list.maximum_number_of_rooms() {
                Some(maximum_number_of_rooms) => RoomListLoadingState::Loaded {
                    maximum_number_of_rooms: Some(maximum_number_of_rooms),
                },
                None => RoomListLoadingState::NotLoaded,
            });

        Ok(Self {
            client: client.clone(),
            sliding_sync: sliding_sync.clone(),
            sliding_sync_list: sliding_sync_list.clone(),
            loading_state: loading_state.clone(),
            loading_state_task: spawn(async move {
                pin_mut!(room_list_service_state);

                // As soon as `RoomListService` changes its state, if it isn't
                // `Terminated` nor `Error`, we know we have fetched something,
                // so the room list is loaded.
                while let Some(state) = room_list_service_state.next().await {
                    use State::*;

                    match state {
                        Terminated { .. } | Error { .. } | Init => (),
                        SettingUp | Recovering | Running => break,
                    }
                }

                // Let's jump from `NotLoaded` to `Loaded`.
                let maximum_number_of_rooms = sliding_sync_list.maximum_number_of_rooms();

                loading_state.set(RoomListLoadingState::Loaded { maximum_number_of_rooms });

                // Wait for updates on the maximum number of rooms to update again.
                let mut maximum_number_of_rooms_stream =
                    sliding_sync_list.maximum_number_of_rooms_stream();

                while let Some(maximum_number_of_rooms) =
                    maximum_number_of_rooms_stream.next().await
                {
                    loading_state.set(RoomListLoadingState::Loaded { maximum_number_of_rooms });
                }
            }),
        })
    }

    /// Get a subscriber to the room list loading state.
    pub fn loading_state(&self) -> Subscriber<RoomListLoadingState> {
        self.loading_state.subscribe()
    }

    /// Get all previous rooms, in addition to a [`Stream`] to rooms' updates.
    pub fn entries(&self) -> (Vector<Room>, impl Stream<Item = Vec<VectorDiff<Room>>> + '_) {
        let (rooms, stream) = self.client.rooms_stream();

        let map_room = |room| Room::new(room, &self.sliding_sync);

        (
            rooms.into_iter().map(map_room).collect(),
            stream.map(move |diffs| diffs.into_iter().map(|diff| diff.map(map_room)).collect()),
        )
    }

    /// Similar to [`Self::entries`] except that it's possible to provide a
    /// filter that will filter out room list entries, and that it's also
    /// possible to “paginate” over the entries by `page_size`.
    ///
    /// The returned stream will only start yielding diffs once a filter is set
    /// through the returned [`RoomListDynamicEntriesController`]. For every
    /// call to [`RoomListDynamicEntriesController::set_filter`], the stream
    /// will yield a [`VectorDiff::Reset`] followed by any updates of the
    /// room list under that filter (until the next reset).
    pub fn entries_with_dynamic_adapters(
        &self,
        page_size: usize,
        room_info_notable_update_receiver: broadcast::Receiver<RoomInfoNotableUpdate>,
    ) -> (impl Stream<Item = Vec<VectorDiff<Room>>> + '_, RoomListDynamicEntriesController) {
        let list = self.sliding_sync_list.clone();

        let filter_fn_cell = AsyncCell::shared();

        let limit = SharedObservable::<usize>::new(page_size);
        let limit_stream = limit.subscribe();

        let dynamic_entries_controller = RoomListDynamicEntriesController::new(
            filter_fn_cell.clone(),
            page_size,
            limit,
            list.maximum_number_of_rooms_stream(),
        );

        let stream = stream! {
            loop {
                let filter_fn = filter_fn_cell.take().await;

                let (raw_values, raw_stream) = self.entries();

                // Combine normal stream events with other updates from rooms
                let merged_streams = merge_stream_and_receiver(raw_values.clone(), raw_stream, room_info_notable_update_receiver.resubscribe());

                let (values, stream) = (raw_values, merged_streams)
                    .filter(filter_fn)
                    .sort_by(new_sorter_lexicographic(vec![
                        Box::new(new_sorter_recency()),
                        Box::new(new_sorter_name())
                    ]))
                    .dynamic_limit_with_initial_value(page_size, limit_stream.clone());

                // Clearing the stream before chaining with the real stream.
                yield stream::once(ready(vec![VectorDiff::Reset { values }]))
                    .chain(stream);
            }
        }
        .switch();

        (stream, dynamic_entries_controller)
    }
}

/// This function remembers the current state of the unfiltered room list, so it
/// knows where all rooms are. When the receiver is triggered, a Set operation
/// for the room position is inserted to the stream.
fn merge_stream_and_receiver(
    mut raw_current_values: Vector<Room>,
    raw_stream: impl Stream<Item = Vec<VectorDiff<Room>>>,
    mut room_info_notable_update_receiver: broadcast::Receiver<RoomInfoNotableUpdate>,
) -> impl Stream<Item = Vec<VectorDiff<Room>>> {
    stream! {
        pin_mut!(raw_stream);

        loop {
            select! {
                // We want to give priority on updates from `raw_stream` as it will necessarily trigger a “refresh” of the rooms.
                biased;

                diffs = raw_stream.next() => {
                    if let Some(diffs) = diffs {
                        for diff in &diffs {
                            diff.clone().map(|room| {
                                trace!(room = %room.room_id(), "updated in response");
                                room
                            }).apply(&mut raw_current_values);
                        }

                        yield diffs;
                    } else {
                        // Restart immediately, don't keep on waiting for the receiver
                        break;
                    }
                }

                Ok(update) = room_info_notable_update_receiver.recv() => {
                    // We are temporarily listening to all updates.
                    /*
                    use RoomInfoNotableUpdateReasons as NotableUpdate;

                    let reasons = &update.reasons;

                    // We are interested by these _reasons_.
                    if reasons.contains(NotableUpdate::LATEST_EVENT) ||
                        reasons.contains(NotableUpdate::RECENCY_STAMP) ||
                        reasons.contains(NotableUpdate::READ_RECEIPT) ||
                        reasons.contains(NotableUpdate::UNREAD_MARKER) ||
                        reasons.contains(NotableUpdate::MEMBERSHIP) {
                     */
                        // Emit a `VectorDiff::Set` for the specific rooms.
                        if let Some(index) = raw_current_values.iter().position(|room| room.room_id() == update.room_id) {
                            let room = &raw_current_values[index];
                            let update = VectorDiff::Set { index, value: room.clone() };
                    /*
                            trace!(room = %room.room_id(), "updated because of notable reason: {reasons:?}");
                    */
                            yield vec![update];
                        }
                    /*
                    }
                    */
                }
            }
        }
    }
}

/// The loading state of a [`RoomList`].
///
/// When a [`RoomList`] is displayed to the user, it can be in various states.
/// This enum tries to represent those states with a correct level of
/// abstraction.
#[derive(Clone, Debug)]
pub enum RoomListLoadingState {
    /// The [`RoomList`] has not been loaded yet, i.e. a sync might run
    /// or not run at all, there is nothing to show in this `RoomList` yet.
    /// It's a good opportunity to show a placeholder to the user.
    ///
    /// From [`Self::NotLoaded`], it's only possible to move to
    /// [`Self::Loaded`].
    NotLoaded,

    /// The [`RoomList`] has been loaded, i.e. a sync has been run, or more
    /// syncs are running, there is probably something to show to the user.
    /// Either the user has 0 room, in this case, it's a good opportunity to
    /// show a special screen for that, or the user has multiple rooms, and it's
    /// the classical room list.
    ///
    /// The number of rooms is represented by `maximum_number_of_rooms`.
    ///
    /// From [`Self::Loaded`], it's not possible to move back to
    /// [`Self::NotLoaded`].
    Loaded {
        /// The maximum number of rooms a [`RoomList`] contains.
        ///
        /// It does not mean that there are exactly this many rooms to display.
        /// Usually, the room entries are represented by [`Room`]. The room
        /// entry might have been synced or not synced yet, but we know for sure
        /// (from the server), that there will be this amount of rooms in the
        /// list at the end.
        ///
        /// Note that it's an `Option`, because it may be possible that the
        /// server did miss to send us this value. It's up to you, dear reader,
        /// to know which default to adopt in case of `None`.
        maximum_number_of_rooms: Option<u32>,
    },
}

/// Controller for the [`RoomList`] dynamic entries.
///
/// To get one value of this type, use
/// [`RoomList::entries_with_dynamic_adapters`]
pub struct RoomListDynamicEntriesController {
    filter: Arc<AsyncCell<BoxedFilterFn>>,
    page_size: usize,
    limit: SharedObservable<usize>,
    maximum_number_of_rooms: Subscriber<Option<u32>>,
}

impl RoomListDynamicEntriesController {
    fn new(
        filter: Arc<AsyncCell<BoxedFilterFn>>,
        page_size: usize,
        limit_stream: SharedObservable<usize>,
        maximum_number_of_rooms: Subscriber<Option<u32>>,
    ) -> Self {
        Self { filter, page_size, limit: limit_stream, maximum_number_of_rooms }
    }

    /// Set the filter.
    ///
    /// If the associated stream has been dropped, returns `false` to indicate
    /// the operation didn't have an effect.
    pub fn set_filter(&self, filter: BoxedFilterFn) -> bool {
        if Arc::strong_count(&self.filter) == 1 {
            // there is no other reference to the boxed filter fn, setting it
            // would be pointless (no new references can be created from self,
            // either)
            false
        } else {
            self.filter.set(filter);
            true
        }
    }

    /// Add one page, i.e. view `page_size` more entries in the room list if
    /// any.
    pub fn add_one_page(&self) {
        let Some(max) = self.maximum_number_of_rooms.get() else {
            return;
        };

        let max: usize = max.try_into().unwrap();
        let limit = self.limit.get();

        if limit < max {
            // With this logic, it is possible that `limit` becomes greater than `max` if
            // `max - limit < page_size`, and that's perfectly fine. It's OK to have a
            // `limit` greater than `max`, but it's not OK to increase the limit
            // indefinitely.
            self.limit.set_if_not_eq(limit + self.page_size);
        }
    }

    /// Reset the one page, i.e. forget all pages and move back to the first
    /// page.
    pub fn reset_to_one_page(&self) {
        self.limit.set_if_not_eq(self.page_size);
    }
}